A short post to explain why it seems like i'm working on multiple sections at once!
Due to COVID, i have been unable to rivet the top wing skins to the spar / rib assembly. I know a few builders have done this solo, but i would prefer to back rivet these using a long back-rivet set i have borrowed from a mate of a mate; so for now the top wing skins completely ready for installation, but are in storage for now.
Since they were on hold, i decided to keep moving by beginning work on the leading edges. Again, i got to a bottleneck with this section. I completed the riveting of the leading edges however, since the top wing skins are installed with the spar shimmed to level on the work bench, I could not complete the chapter by riveting the leading edges to the spar.
So, moving on to the fuel tanks!
No comments:
Post a Comment