General Index
Practice Kits
Priming
- Canopy / Roll Bar Wear & Detritus
- Painting Glareshield / Final Painting Canopy Frame
- Final Painting Chapter 35 & 37
- 32-08: Painting the Interior of the Cockpit
- 29-22: Masking cockpit / Masking for Air Vents
- 22-05: (again) Primed and riveted RH aileron skins and stiffners
- 22-05: Primed and riveted aileron skins and stiffners
- 21-06: Priming Flap Components
- 18-09: Priming Fuel Tank External Surfaces
- 16-02: Wing Skins Prep / Wing Skins on Hold
- The Priming Process explained (Priming Wing Ribs)
- Section 10 - Aft Fuselage Begins
- 9-09: Elevator Parts Priming
- 8-06: HS Rib deburring and Priming
- 6-02:05 - Vertical Stab Priming and Assembly
- First go at Priming
Tools
- 11-04: Elevator Trial Fit
- 8-06: HS Rib deburring and a homemade Flanger™
- Backrivet Plate V2
- DRDT2 Dimple Tables
- DRDT2 Laser!
- Backrivet Plate
Workshop
- Fuel Line Straightening Tool
- Building a Fuselage Rotisserie
- 30-02: Baggage Bulkhead & Workshop Preparation for the BIG JOIN!
- 17-08: Riveting Leading Edges to Wing
- 13-03: Main spar Priming / Nutplates / Wing Cradle Build
- Workbench Extension - Wing Spars
- Power Tool Cart & Spray Booth
- Shop Cart Build
Proseal
- 29-12: Initial Riveting of the Side Skins
- 18-09: R Fuel Tank Leak Repair
- 18-09: Fuel tank Testing
- 18-09: Miscellanea Installation (incl Fuel Senders)
- 18-08: Rear Baffle Install
- 18-06: Aft Root Rib #1 / Fuel Vent Union Install
- 18-05: Fuel Tank J Stiffners / An Injury / Tank Attach Brackets / Fuel Vent Lines
- 18-05: Tank End Ribs (#7)
- 18-05: Fuel Tank Internal Ribs (#2 - #6)
- 18-05: Prosealing in the Fuel Tank Ribs -> Rib #1
- 18-05: Fuel Tank Stiffners / Sundry
- Fuel Tank Proseal Test Piece
- 9-23: Prosealing in Elevator Foam Ribs / Other Small Tasks / Riveting the trailing edges
Fibreglass
- 38-31: Canopy Fibreglass Fairing - Round 10 - Continuing on and finally completing the fairing!
- 38-31: Canopy Fibreglass Fairing - Round 9 - Be Careful what you use on the Canopy Fairing
- 38-31: Canopy Fibreglass Fairing - Round 8 - Chipped Edge Repair / Christmas Eve Heartbreak
- 38-31: Canopy Fibreglass Fairing - Round 7 - More Primer / A step backwards
- 38-31: Canopy Fibreglass Fairing - Round 6 - Sanding back the skim coat / first & second coats of primer
- 38-31: Canopy Fibreglass Fairing - Round 5 - Sanding off the Micro / Epoxy Skim Coat
- 38-31: Canopy Fibreglass Fairing - Round 4 - Initial Sanding to Shape / Refining the Edge with Micro
- 38-29 -> 30: Canopy Fibreglass Fairing - Round 3 - Fibreglass Layup!
- 38-28 -> 31: Canopy Fibreglass Fairing - Round 2 - Fibreglass Preperation
- 38-28 -> 31: Canopy Fibreglass Fairing - Round 1 - Void Filler
- 24-04: Finishing off the Wingtips, and the wings!
- 24-03: Wingtip Light Lenses
- 24-04: Cleaning up the wingtip transition to the wing skins
- 12: Empennage Fairings Complete
- 12-05: Elevator, Rudder, VS and HS tip fairings
Interior / Cabin
- Installing the Glareshield Cover
- Glareshield Cover
- Painting Glareshield / Final Painting Canopy Frame
No comments:
Post a Comment